ALLEN & HEATH GLD Betriebsanweisung PDF herunterladen (Seite 28)

Qu Mixer User Guide 28 AP9372 iss.1

6.12 The Master Strip

Qu provides a dedicated fader strip for the Mix Masters. It presents the fader and controls for the mix

currently selected using the Mix keys alongside. The sends to the selected mix are presented on the

channel faders. They move to show the current settings. This provides a very quick way to access each

mix without the need to switch to the Masters layer.

Mute key – Press to turn off the mix master audio signal. The Mute

key lights red when the audio is muted.

Sel key (select) – Press to access the mix Processing (PEQ,

GEQ, Compressor, Delay) and its Routing parameters using the

SuperStrip and Touch Screen. The screen presents related parameters

while its Processing or Routing key is active.

The Sel key can also be used to:

Copy mix processing – Hold down the Copy key and press the

Sel key to copy the processing settings. Then select a different

Mix, hold down the Paste key and press the Sel key to instantly

paste those settings to that mix.

Reset mix processing – Hold down the Reset key and press the

Sel key to instantly reset all its processing to factory default.

Assign all sources – Hold down the Assign key and press the Sel

key to toggle all sources on (assigned) or off to the mix.

Set all sources Pre or Post-Fade – Hold down the Pre Fade key

and press the Sell key to toggle all sources Pre or Post Fade.

PAFL key – Press to listen to a mix using headphones and check its

level on the main meters. The meter PAFL indicator lights. Press PAFL

again to turn it off. A SoftKey can be assigned to Clear All active PAFL

selections. Options are available in the Setup screen to choose how

you want PAFL to work. The default setting is AFL (after-fade listen).

Mix meter – The strip meter lets you keep an eye on the mix master

signal level. This is ‘post-fader’ and displays the level after the fader and

mute control to follow the signal available at the output of the mixer.

Pk – Lights red to warn that the signal is too hot and mix level

should be reduced. It turns on 3dB before clipping to warn you

before audible distortion.

0 – Lights when the signal reaches nominal 0dBu allowing a

healthy 18dB headroom. This is the normal level for mixing.

Sig – Lights to show signal presence. It turns on at -26dBu.

Fader – Controls the level of the mix master currently selected. There

is +10dB boost available. Normal setting is around the ‘0’ position.

Mix Select keys – These select which mix master is presented on

the master strip. Only one can be active at any time. Press a key to

select a mix. The channel faders move to become the sends to the

selected mix. Channels can be assigned using the Sel keys. Press the

key again turn return to the main LR mix.

LR sets the strip to control the main LR mix. This is the normal

selection for mixing the FOH (main PA) sound.

FX sets the strip to control the FX internal effects send master.

The Qu-16 has 2 FX buses, the Qu-24 has 4 FX buses.

Mix, Grp sets the strip to control one of the mono or stereo mix or

Group masters. Groups are not available on the Qu-16.

The Mix key can also be used to copy or reset any of the FX and Mix

send levels, pan and assignments. This does not affect the Pre/Post

settings.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH GLD Betriebsanweisung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer ALLEN & HEATH GLD