ALLEN & HEATH GLD Betriebsanweisung PDF herunterladen (Seite 42)

Qu Mixer User Guide 42 AP9372 iss.1

8.3 Audio Setup –Signal Generator

Set up and assign the Signal Generator to test

loudspeakers and align levels between equipment.

Source – Touch to open the list of sources available:

 Sine – Pure tone with adjustable frequency. Set to

1kHz and use meters to match equipment levels.

 White Noise – Equal energy per Hz.

 Pink Noise – Filtered white noise for equal energy

per octave. This is a good source to use for

testing loudspeaker drivers and phase. Its

response matches the way we hear frequencies.

 Band-pass Noise – Pink noise filtered around a

frequency which can be swept from low to high.

Level – Start with the level set low to avoid unexpected

loud sounds when you assign to the mixes.

Mute – Turns the signal off.

Assign – Touch to toggle the assignments to the LR

and Mixes 1-10 on or off. Assignment to the Groups

and Matrix is not available on the Qu-16.

Note – To avoid noise in the system remember to turn

the assignments off when you are finished using the

generator.

8.4 Control Setup – Custom Strip

The Custom Layer can have any combination of

channel, FX , master and MIDI strips assigned to its

faders. Faders can be left unassigned.

This lets you arrange the faders you are using for your

show into one convenient layer, or use the Custom

Layer to control your Digital Audio Workstation (DAW).

The screen presents an assignment button for each

fader. Touch a button and then turn the screen Rotary

to scroll through the available strips.

Use the Fn key ‘+1’ function to quickly assign strips in

sequence.

DAW control – When working with a DAW (Digital

Audio Workstation) it is typical to assign all faders as

MIDI strips so that the Custom Layer can be used to

control the audio tracks within the DAW.

Touch button 1, turn the rotary until it displays ‘MIDI’,

then press Fn key ‘+1’ to quickly assign the other

strips for DAW control.

The following strip types are available:

X Unassigned

CH Mono input channels

ST Stereo input channels

FX Ret FX returns

FX Send FX sends

Mix Mix masters 1-10

LR Main LR master

Grp Stereo Groups (not Qu-16)

MTX Stereo Matrix (not Qu-16)

MIDI MIDI DAW control

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH GLD Betriebsanweisung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer ALLEN & HEATH GLD