ALLEN & HEATH GLD Betriebsanweisung PDF herunterladen (Seite 27)

Qu Mixer User Guide 27 AP9372 iss.1

6.10 Mute Groups

The Qu features 4 Mute Groups. You can assign channels to a Mute Group so that pressing its master

key will instantly mute all assigned channels. For example, mute all drum channels, mute all mics on

stage during band changeover, or mute all FX returns between songs. Mute masters are accessed from

the Home or any Routing screen, or using the SoftKeys.

The following may be assigned to Mute Groups:

 Mono and stereo Input Channels

 FX Send masters

 FX Return channels

 Stereo Groups (not Qu-16)

Assigning a single channel

Press an input channel or FX send or return fader strip

Sel key and select the Touch Screen Routing screen.

Open the Mute Grp Assign tab. Use this screen to

assign the channel to any combination of the 4 Mute

Groups.

A green tick next to the button indicates that the Mute

Group master is available on the related SoftKey.

Assigning all channels

While in any Routing screen press the Fn key to open

the Mute Groups view.

Select the tab for the Mute Group you wish to assign.

All sources to that group are shown. Touch buttons to

toggle assignments on or off. Touch the Clear/Set All

button to turn off or on all the assignments.

Press the Fn key again to close the Mute Groups view.

6.11 Using the Mute Groups

There are 3 ways to use the Mute Groups:

 Touch the master buttons on the Home screen.

 While in any Routing screen press the Fn key to

open the Mute Groups view. Select the MG

Masters tab and touch the master buttons.

 Assign and use one or more SoftKeys as Mute

Group masters. The Mute Groups are assigned to

SoftKeys with the same number as the group.

The Mute key will flash red if the channel is muted by a

Mute Group. A short flash shows it is muted by the

group only. A long flash shows it is muted by the Mute

key and a group.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

Keine Kommentare

ALLEN & HEATH GLD Betriebsanweisung Seite 27