ALLEN & HEATH GLD Betriebsanweisung PDF herunterladen (Seite 55)

Qu Mixer User Guide 55 AP9372 iss.1

11.2 System Hard Reset

A power up reset is available if you need to fully reset

the Qu mixer settings and memories. This could be

done to clear the system out before sending the mixer

to a client, or if you suspect a system problem.

To reset mix parameters before starting a show or

sound check, use a Scene or the Reset Mix Setting

function described earlier in this guide.

Note – A hard reset clears all current settings, all

Scenes and all User Libraries.

First turn off the system including amplifiers and

powered speakers.

To hard reset the Qu mixer - Press and hold the

touch screen Reset and Setup keys together and then

power up the mixer. Keep the keys pressed for at least

5 seconds while the mixer boots. Release the keys.

The hard reset:

 Resets the current settings the same as using the

Scenes screen ‘Reset Mix Settings’ button.

 Resets non-scene parameters and user

preferences to a factory default.

 Clears scene recall Safes.

 Clears all memories including Scenes and User

Libraries.

 Resets the Network IP address and the touch

screen calibration.

System hard reset:

 Source Preamp, Gain 28dB, 48V off

 ST1-3 trim 0dB

 HPF out, 100Hz

 PEQ and GEQ in, flat

 Gates out, thres -36dB, depth 20dB

 Comp out, thres 0dB, ratio 3.2:1

 Delays 0ms

 Mix source post-EQ

 Sends to Mixes -Inf and pre-fade

 Sends to FX -Inf and post-fade

 Direct Out post-fade/mute, trim 0dB

 Mutes off

 Channel faders -Inf

 FX return faders 0dB

 FX send and Mix master faders -4dB

 LR master fader -Inf

 FX1 = Mix>Return, Reverb (EMT250)

 FX2 = Mix>Return, Delay (Vocal)

 FX 3 and 4 = unassigned

 Mute Groups unassigned

 AES, Alt Out patch LR post-fade

 Qu-Drive stereo patch LR post-fade

 USB patch CH1-16, ST1-3, LR

 Talkback unassigned, HPF 120Hz

 Custom Strip unassigned

 SoftKeys = Mute Groups 1-4

 Input PAFL = PFL, mix = AFL

 PAFL additive mode off

 Sel follow PAFL on, LR to PAFL on

 PAFL trim 0dB, delay 0ms

 Talkback mic gain 27dB

 Sig Gen Pink Noise, unassigned

 Clears all scene Safes

 Clears all Scene memories

 Clears all User Libraries

 Resets Network address to DHCP

 Resets touch screen calibration

Hold for 5 seconds

while powering up

the mixer

1 2 ... 50 51 52 53 54 55 56 57 58 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH GLD Betriebsanweisung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer ALLEN & HEATH GLD