ALLEN & HEATH GLD Betriebsanweisung PDF herunterladen (Seite 17)

Qu Mixer User Guide 17 AP9372 iss.1

Mute key – Press to turn off the channel audio signal. This affects the send to

all mixes including LR, groups, effects and stage monitors. The Mute key lights red

when the channel is muted. It flashes when it is muted by a Mute Group master.

Sel key (select) – Press to access the Channel Processing. Parameters can

be adjusted using the SuperStrip controls. The touch screen will display the

settings and provide additional controls if either the Processing or Routing screen

is active. The Sel key is also used for:

Assign mix routing – Hold down the ‘Assign’ key and press Sel keys to

assign channels to the mix currently selected in the Master Strip. The Sel

keys light green to show channels assigned to the selected mix.

Assign Pre/Post fade sends – Hold down the ‘Pre Fade’ key and press Sel

keys to toggle channel sends pre or post fader for the mix currently selected

in the Master Strip. The Sel keys light green to show channels set pre-fade.

Copy channel processing – Hold down the Copy key and press a channel

Sel key to copy its processing settings. Then hold down the Paste key and

press one or more Sel keys to instantly paste those settings to other

channels.

Reset channel processing – Hold down the Reset key and press a channel

Sel key to instantly reset all its processing to factory default.

Reset Graphic EQ band – Press Sel to reset the associated GEQ frequency

band to 0dB while in GEQ Flip mode.

PAFL key – Press to listen to a channel using headphones and check its level

on the main meters. The meter PAFL indicator lights. Press PAFL again to turn it

off. A SoftKey can be assigned to clear all active PAFL selections.

Options are available in the Setup screen to choose how you want PAFL to work:

Auto-cancel – Listen to one channel at a time.

Additive mode – Listen to more than one channel at a time.

Sel follow PAFL – Link the Sel switch so that pressing PAFL automatically

selects the processing for that channel.

LR to PAFL – Routes the main LR mix to the monitor when there is no PAFL

selected.

Output AFL – This option sets the mix strip PAFL keys to monitor AFL (after-

fade listen). With this option turned off these keys monitor PFL (pre-fade

listen). The default is AFL so that you can check mixes after the master fader.

Input AFL – This option sets the input strip PAFL keys to monitor AFL (after-

fade listen). With this option turned off these keys monitor PFL (pre-fade

listen). PFL is the usual setting for inputs so that you can check and set their

gain before you bring up the faders.

Channel meter – The strip meters let you keep an eye on signal levels while

you are mixing. These display channel level before the fader and mute control:

Pk – Lights red to warn that the signal is too hot and gain or trim should be

reduced. It turns on 3dB before clipping to warn you before audible

distortion. Pk senses the signal at several points within the channel.

0 – Lights when the signal reaches nominal 0dBu allowing a healthy 18dB

headroom. This is the normal level for mixing.

Sig – Lights to show signal presence. It turns on at -26dBu.

Fader – Controls the level of the input channel, FX or mix master assigned to it.

This can be the main channel fader or a send to an effect or mix depending on

which Mix Select key is active in the Master Strip.

The faders can control the Graphic EQ frequency bands while in GEQ Flip mode

with a mix master Sel key active. The range of frequencies accessed by the faders

is highlighted in the touch screen and labelled at the top of the faders. The centre

0dB flat position is marked on the fader scale.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH GLD Betriebsanweisung Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer ALLEN & HEATH GLD