ALLEN & HEATH GLD Betriebsanweisung PDF herunterladen (Seite 54)

Qu Mixer User Guide 54 AP9372 iss.1

11.Resetting the Mixer

There are two ways to reset the Qu settings:

11.1 Reset Mix Settings – A starting point for mixing

This button in the Scenes screen resets the mixer to a

known starting point for mixing. It provides a quick way

to reset the processing, mixes and patching before a

show or after another user has finished with it.

All parameters that can be stored in Scene memories

are reset to a factory default. Parameters that are not

stored in scenes are not affected. This reset does not

affect existing scenes stored in the mixer.

If you want to keep your current settings then save

these as a Scene before resetting the mixer.

Note - This reset is not affected by the Global filter and

Safes settings.

Touch and hold the Reset Mix Settings button for 1

second until the confirmation screen appears. Touch

Yes to reset the mixer or No to exit without resetting.

This ‘resets the board’ ready for mixing:

 All preamps are patched and have nominal mic

gain set and phantom power switched off, a good

start for vocal microphones,

 All EQ is switched in and set flat ready to start

adjusting tone,

 Gates and compressors are switched out but have

their parameters set ready for being switched in

for applications such as drum gating and vocal

compression,

 Channels are assigned to the mixes and FX with

their faders and send levels turned down ready to

start dialling into the mix,

 The mixes are set pre-fade and sourced post-EQ,

pre-compressor ready to be used as monitor

sends, a common application for the mixes.

 The FX master and return faders are turned up

and a default reverb and delay patched ready for

you to hear the effects as soon as you raise a

channel send.

 The Mix master faders are turned up ready to hear

sound when you raise a channel send. The main

LR master is turned down to avoid unexpected

loud level in the PA.

 The Groups are unassigned and their master

faders turned down (not Qu-16).

 The Matrix sends are assigned and their master

faders turned down (not Qu-16).

Creating your own start settings – You

can start by resetting the mixer and then editing the

patching, levels and parameters to suit your starting

preferences. Name and store this as a Scene, for

example Scene 1 “Reset Board”.

Reset mix settings:

 Source Preamp, Gain 28dB, 48V off

 ST1-3 trim 0dB

 HPF out, 100Hz

 PEQ and GEQ in, flat

 Gates out, thres -36dB, depth 20dB

 Comp out, thres 0dB, ratio 3.2:1

 Delays 0ms

 Mix source post-EQ

 Sends to Mixes -Inf and pre-fade

 Sends to FX -Inf and post-fade

 Direct Out post-fade/mute, trim 0dB

 Mutes off

 Channel faders -Inf

 FX return faders 0dB

 FX send and Mix master faders -4dB

 LR master fader -Inf

 FX1 = Mix>Return, Reverb (EMT250)

 FX2 = Mix>Return, Delay (Vocal)

 FX 3 and 4 = unassigned

 Audio Groups unassigned (not Qu-16)

 Group and Matrix faders –Inf (not Qu-16)

 Matrix sends assigned, post (not Qu-16)

 Mute Groups unassigned

 AES, Alt Out patch LR post-fade

 Qu-Drive stereo patch LR post-fade

 USB patch CH1-16, ST1-3, LR

 Talkback unassigned, HPF 120Hz

 Custom Strip unassigned

 SoftKeys = Mute Groups 1-4

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH GLD Betriebsanweisung Seite 54

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audiomischer ALLEN & HEATH GLD