ALLEN & HEATH iLIVE Betriebsanweisung PDF herunterladen (Seite 34)

iLive Reference Guide – Hardware Part 1 - 34 AP6526-1 iss.5

Patching signals to MixRack Port B

iLive recognises the type of option card fitted to Port B of the

MixRack. Use the TouchScreen or Editor OUTPUTS screen Port B

tab. You can assign one or a range of signals to the different

outputs by touching the output you want to assign and choosing

selections from the drop down menu. Touch Apply to confirm the

selection.

The input and output patching including Port B is archived within the

Show memories and can be stored in the Scenes ‘Patchbay’ item.

Patching signals to Surface Port B

Port B at the iLive Surface can be used to provide outputs for

recording and further signal distribution.

This applies only to the modular iLive Surfaces with the RAB2

module fitted. The T and R Series Surfaces do not include Port B.

Port A is used to link local audio at the Surface to and from the

MixRack. It carries 64 signals in both directions. Link channels 1-32

and 63/64 are reserved for the local audio card slots and PAFL

monitor, while link channels 33-62 are available for further signal

distribution from Port B at the Surface, for example recording.

Surface Port B and firmware version V1.7. It is

possible to fit the M-MMO option and assign its outputs, but note

the following:

The Status screen does not recognise the Port B option even if one

is fitted.

Use the TouchScreen or Editor OUTPUTS screen ACE Link or ESA

tab to assign signals to the M-MMO option fitted in Port B. Use

CH33 and higher. These are permanently mapped to the M-MMO

output sockets according to the table below.

You can assign one or a range of signals to the different outputs by

touching the output you want to assign and choosing selections

from the drop down menu. Touch Apply to confirm the selection.

1 = 33

2 = 34

3 = 35

4 = 36

5 = 37

6 = 38

7 = 39

8 = 40

9 = 41

10 = 42

11 = 43

12 = 44

13 = 45

14 = 46

15 = 47

16 = 48

17 = 49

18 = 50

19 = 51

20 = 52

21 = 53

22 = 54

23 = 55

24 = 56

1 = 57

2 = 58

3 = 59

4 = 60

5 = 61

6 = 62

7 = PAFL L

8 = PAFL R

M-MMO in Surface Port B

Default assignment for firmware V1.7

Not used

ADAT ADAT ADAT iDR A iDR B

AVIOM

Note For firmware V1.7 the M-

MMO card is the only option

supported in the iLive Surface RAB2

module Port B.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH iLIVE Betriebsanweisung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DJ-Controller ALLEN & HEATH iLIVE