ALLEN & HEATH iLIVE Betriebsanweisung PDF herunterladen (Seite 19)

iLive Reference Guide – Hardware Part 1 - 19 AP6526-1 iss.5

iLive Module options – Analogue inputs and outputs

MIC/LINE Input

part M-MICIN-A

This is the main audio input module for the iLive system. It

provides 8x high performance analogue input preamps for

microphone and line level signals. The front end gain, pad

and phantom power are remote controlled via the network

connection from the Surface or PC. The settings may be

recalled as part of the iLive system memories.

CHK Yellow indicator follows the PAFL function. It lights

when the channel it is associated with is currently being

PAFL’d at the surface or PC. This provides a quick way to

identify which sockets are mapped to the channels, for

example when the FOH engineer wants to indicate to the

stage tech which connection to check.

Note: CHK will light when the preamp is the main channel

source, insert return or mix external input for the channel

being PAFL’d. For example, 4 may be lit if you PAFL a

stereo input channel which has an insert assigned.

PP Lights when phantom power voltage is detected at the

XLR input socket. This will light whether the voltage is

sourced internally from within the MixRack, or externally via

the cable plugged in.

INPUT XLR Balanced audio input with wide gain range

accepting signals from -65dBu to +30dBu. Gain is remote

controlled and has a 1dB resolution and range of 80dB

including 25dB pad. The preamps feed the iLive mix engine

through 24bit, low noise, low latency converters. The preamp

gain is automatically set for +4dBu or -10dBV operating level

if assigned as an insert.

DUAL MIC/LINE Input part M-DUALIN-A

An 8 channel input module to connect up to 16 microphone

or line level signals. As described above but with remote

controlled selection between two inputs A or B per channel.

Connection is via screw terminal Phoenix plugs (supplied),

ideal for installed applications or where external stage boxes

are used. The green indicator lights when the B input is

selected.

LINE Output part M-LINEOUT-A

8x Balanced line level outputs operating at +4dBu and with

+22dBu maximum output. Any signal whether a mix output,

direct output, insert send or MixRack input may be assigned

to any socket.

CHK Lights when the socket is associated with a channel

currently being PAFL’d, whether an output or insert send.

MUTE A red LED lights when the output is muted.

Note: The line outputs are relay switched to protect

speaker systems from power on/off thumps.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH iLIVE Betriebsanweisung Seite 19

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DJ-Controller ALLEN & HEATH iLIVE