ALLEN & HEATH iLIVE Einstellungsanleitung

Stöbern Sie online oder laden Sie Einstellungsanleitung nach DJ-Controller ALLEN & HEATH iLIVE herunter. ALLEN & HEATH iLIVE Setup guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 8
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
iLive M-DANTE Option Instructions 1 AP8340 issue 2
M-DANTE is one of several plug-in card options available from Allen &
Heath that may be fitted to the iLive Series.
Dante
TM
is a high performance, multi-channel, AVB ready industry
standard digital media transport system developed by Australian
company Audinate that runs over standard IP networks and can
distribute signals between iLive, computers and 3
rd
party Dante
TM
enabled equipment. Its main benefits for iLive are:
64 channel bi-directional audio plus control over CAT5
Uses standard off-the-shelf computer networking equipment
Easy to add, name, remove and rearrange devices
Secondary port for redundant connection option (page 5 Note 1)
Control port to bridge iLive or other network over Dante (Note 2)
Very low latency
Direct connection to computer for multitrack recording
Dante Virtual Soundcard (DVS) software
Dante Controller software for setting up the network
Note The Allen & Heath M-DANTE card provides an interface to the
Dante network. The Dante ‘Brooklyn II’ hardware used and the software
required to set it up and record to computer is provided and supported
by Audinate. For further information or help on using Dante please refer
to the documentation and support at Audinate: www.audinate.com
M-DANTE is supplied with one Dante Virtual Soundcard licence to
enable a single computer. More can be purchased from Audinate if
required. The token below is needed to obtain your licence Id. Please
read the instructions provided within this guide.
Dante Virtual Soundcard Licence ID token:
iLive Dante Option Publication AP8340
Fitting and Setup Guide
Part number M-DANTE-A
Issue 2
This guide applies to Dante Release 1 (firmware 3.4.x). Some features will
become available with Release 2 (firmware 3.5.x) due for release soon.
Seitenansicht 0
1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Fitting and Setup Guide

iLive M-DANTE Option Instructions 1 AP8340 issue 2 M-DANTE is one of several plug-in card options available from Allen & H

Seite 2 - REMOTE AUDIO 2

iLive M- DANTE Option Instructions 2 AP8340 issue 2 Fitting to the fixed format iLive The M-DANTE card option may be fitted to Port B

Seite 3

iLive M-DANTE Option Instructions 3 AP8340 issue 2 Dante Virtual Soundcard (DVS) is a software application that turns your PC or Mac in

Seite 4

iLive M- DANTE Option Instructions 4 AP8340 issue 2 Dante Controller is a software application provided by Audinate which allows users t

Seite 5 - Connections and indicators

iLive M-DANTE Option Instructions 5 AP8340 issue 2 Connections and indicators Primary Port Gigabit Ethernet, Locking EtherCon RJ45

Seite 6 - Recording

iLive M- DANTE Option Instructions 6 AP8340 issue 2 Connecting to a single device This example shows connection to a PC or Mac for multi

Seite 7 - Gigabit Switch

iLive M-DANTE Option Instructions 7 AP8340 issue 2 Linking iLive systems for FOH/Monitor This example shows two iLive systems using Dant

Seite 8

iLive M- DANTE Option Instructions 8 AP8340 issue 2

Kommentare zu diesen Handbüchern

Keine Kommentare