ALLEN & HEATH iLIVE Betriebsanweisung PDF herunterladen (Seite 22)

iLive Reference Guide – Hardware Part 1 - 22 AP6526-1 iss.5

Module options – MixRack system

CPU module

Provides the control interface to the MixRack. This module is

identified as the ‘iDR RACK CPU’. It is not interchangeable

with the iLive Surface CPU module.

Power ON Blue LEDs display the power supply status.

One or two power supply modules may be fitted to the

MixRack. The second provides dual supply redundancy.

12V LAMP Plug in a standard 4-pin XLR gooseneck

console lamp to illuminate the rack while plugging up in a

dark environment. We recommend you use the Allen &

Heath LEDlamp with long life white LED bulbs and built-in

dimmer.

NETWORK A 3 port Ethernet switch is built in. This lets

you connect several network devices to the MixRack, for

example an iLive Surface and a laptop running the iLive

Editor software. The yellow Lnk/Act indicators flash to

indicate network data activity.

Note: Do not connect more than one network cable

between two devices. Attempting to connect a second

cable as a ‘redundant backup’ will result in loss of control.

Reset A recessed switch lets you reset the network address

and settings to factory default. This is useful if you are using

a MixRack and a Surface with unknown network addresses

or which had different addresses previously set. Resetting

each networked device (MixRack, Surface and

TouchScreen) will ensure the devices connect correctly. To

reset the settings, press and hold the switch in using a

pointed object while powering up the rack. Keep the switch

pressed for at least 15 seconds while the rack boots. Default

settings are:

IP address 192.168.1.1 (MixRack)

192.168.1.2 (Surface)

Subnet mask 255.255.255.0

Gateway 192.168.1.254

MIDI IN, THRU and OUT - Standard MIDI interface for

external system control using MIDI messages.

PL-Anet - Proprietary RS485 based control port for

connecting Allen & Heath PL Series remote controllers such

as wall plates, GPIO and fader/encoder panels.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 42 43

Keine Kommentare

ALLEN & HEATH iLIVE Betriebsanweisung Seite 22