ALLEN & HEATH iLIVE Bedienungsanleitung Seite 70
- Seite / 107
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
iLive Reference Guide – Firmware Part 2 - 70 AP6526-2 iss.5
Name and Colour
Each Input channel, mix master and DCA master can have a 5 character name and one of 6 colours or no
backlight applied to display on the Surface. The names appear on the strip LCDs and TouchScreen
pages, and the colour affects the strip LCD backlights. The LCDs form a virtual write-on strip that makes
mixing with iLive a very visual and intuitive experience. Note that all names and colours except the DCA
masters can also be edited from within the related channel processing SEL screens as an alternative to
using the NAME & COLOUR screen. However, the screen provides a quick way to change the colour of
a range of strips or all channels of a certain type
There are two ways to name and colour channels:
Channel Processing view
In normal mixing mode, press SEL to access the channel
processing. Make sure all screen keys are turned off so that
the channel parameters are displayed on the screen.
Navigate to the name and colour screen:
Input Channels - PREAMP screen
Mix Masters - EXT INPUT screen
DCA Masters – Top toolbar Name & Colour tab
Name & Colour screen
Press the TouchScreen NAME & COLOUR key.
Strip Select / Single Strip Select - Press a strip SEL key.
Touch Name to open the on-screen keypad. Touch Colour to
select a colour. Touch Apply.
Strip Select / Block Strip Select - Press the first SEL key
then the last in the range you want to colour. All green SEL
indicators in the range light. Touch Colour to select the
colour. Touch Apply.
Note – Apart from resetting names to their channel
numbers, naming is disabled in Block mode.
Channel Select - Select Channel Type and the range. Select
Colour and press Apply.
Note - To restore the SEL keys to normal mixing mode
turn off the NAME & COLOUR key.
Touch Reset to delete the name and restore the channel
number.
Quick Menu
A quick naming facility opens a second keypad to let you
create and store up to 48x of your most often used names.
To apply, press a strip SEL key and simply touch a name.
Touch Edit to edit or create new names.
Note – The user defined quick names are stored in the
Show memories. These get overwritten with the contents of
the Show when it is recalled.
- Part 2 – Firmware 1
- ALLEN&HEATH 2
- Table of Contents 3
- V1.70 where: 5
- The Status screen 8
- Lower Status bar 9
- OUTPUT AFL 14
- INPUT AFL 14
- CLEAR ALL 14
- GEQ FADERS OFF 15
- ALT VIEW 15
- FREEZE IN LAYERS 15
- Surface basics – The SEL key 16
- Input Channel Parameters 17
- Mix Master Parameters 18
- Short FX Return Parameters 19
- DCA Settings 20
- Surface basics – The MIX key 21
- Channel and Mix processing 24
- EXT. INPUT (Mix only) 26
- Mix Master name and colour 26
- GATE (Channel only) 27
- DELAY (Channel and Mix) 31
- Patch to 32
- Patch from 32
- Reverbs - SMR 36
- Modulation FX - ADT 37
- Modulation FX - Chorus 37
- Modulation FX - Flange 37
- Modulation FX - MOO Phaser 38
- Hypabass 39
- Gated Verb 40
- Empty rack 40
- Patching the Outputs 41
- Using DCA (and MUTE) groups 43
- Channel Ganging 44
- Information 45
- T-80 Surface 45
- The METERS screen 47
- PAFL monitor system 48
- XLR CABLES 50
- Talkback system 53
- SoftKeys 55
- PL-Anet remote control 55
- MIXRACK setup 56
- The Main Mix 59
- Quick Input Source Setup page 61
- SURFACE setup 63
- Assigning the Surface Strips 64
- Strip types available 64
- Assigning the Soft Keys 65
- To assign the SoftKeys 65
- Assigning PL Devices 66
- To assign PL controls 66
- The Surface ALT VIEW key 67
- Name and Colour 70
- User Profiles 71
- Library memories 72
- Scene memories 73
- Select All 74
- USB Scene Transfer 76
- Show memories 77
- Using TEMPLATE Shows 79
- Working with USB data 81
- The UTILITY screen 82
- Troubleshooting 97
- System fails to connect 98
- Lost connection 99
- Laptop fails to connect 99
- Incompatible firmware 99
- User Show fails to load 99
- Socket Preamp Pad 103
- Socket Preamp 48V 103
- Channel Name 103
- Channel Colour 103
- Scene Recall 104
- Specification 105
- RELAYBAL 106
- Conditions Of Warranty 107
Verwandte Produkte und Handbücher für DJ-Controller ALLEN & HEATH iLIVE
(43 Seiten)
(14 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 4.382 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern