ALLEN & HEATH iLIVE Bedienungsanleitung PDF herunterladen (Seite 44)

iLive Reference Guide – Firmware Part 2 - 44 AP6526-2 iss.5

Channel Ganging

Ganging lets you link selected processing and mix parameters between input channels or masters, for

example the EQ, gate and compressor of a stereo keyboard, or the GEQ of the L and R main mix. iLive

lets you create up to 8 gangs with up to 8 channels in each. Ganging does not include the input Preamp

(Gain).

Note: Although you can configure stereo

channels, Ganging is the preferred method for

linking channels when mixing live. Creating and

removing gangs can be carried out quickly ‘on the

fly’ while mixing. However, configuring stereo

channels using the MIXRACK SETUP / Mixer

Config screen resets the DSP architecture, takes a

while to complete, and should only be used for

setting up ‘permanent’ stereo channels, for example

walk-in music players and external effects returns.

Creating a channel gang

To enter Ganging Setup mode and view and assign

ganged input or mix master channel parameters,

select the TouchScreen MIXRACK / Ganging page.

Ganged channels must be compatible input or mix

types. Up to 8 gangs can be assigned with up to 8

channels each. The parameters available to be

ganged are known as the 'Attributes'. These include

processing such as EQ and dynamics, delay,

routing levels and assignments and mutes.

Touch a numbered Gang box in the left hand pane.

Press the SEL key on the first channel strip you

want to gang. Now touch the screen Attributes tab

and highlight the parameters you want to gang.

Touch Apply to accept the changes. Press the SEL

keys for the other channels you want to add to the

gang.

The channels currently ganged are shown in the

Members tab and on the related fader strip SEL

keys. To remove gangs use the strip SEL keys or

the Remove buttons in the Members tab.

Note: Do not leave the screen in the Ganging

page. To restore normal operation of the strip SEL

keys make sure you exit the Ganging setup screen.

Application tip: Hiding channels in ganged

pairs. If you have ganged a pair of channels, for

example all parameters except Pan for a stereo

keyboard, you could assign just one to a Surface or

Editor strip. This would save strips and enable you

to adjust the fader, mute and parameters using just

the one strip. However, the Preamp Gain cannot be

ganged. You could duplicate both channels on a

fader Layer you are not using to be able to access

the Preamp for both sides of the stereo pair during

sound check.

MUTE

SEL

MIXMIX

PAFL

MUTE

SEL

MIXMIX

PAFL

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 106 107

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH iLIVE Bedienungsanleitung Seite 44

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DJ-Controller ALLEN & HEATH iLIVE