ALLEN & HEATH iLIVE Einstellungsanleitung PDF herunterladen (Seite 7)

iLive M-DANTE Option Instructions 7 AP8340 issue 2

Linking iLive systems for FOH/Monitor

This example shows two iLive systems using Dante as a digital mic

splitter to share the Mic Preamps for FOH and Monitor mixing. The

Gigabit switch is needed if you want to add recording and other Dante

equipped audio devices.

Routing and clocking signals

Route signals to the 64 Dante channels on Port B using the iLive

OUTPUTS screen Port B tab. Route signals around the Dante network

using Dante Controller.

Return signals from the Dante network to the iLive channels using the

PREAMP screen Source menu. To route a range of channels use the

Remote (Port B) option in the MIXRACK / Mixer Pref / Quick Input

Source Setup screen.

Remember to set the iLive Audio Clock Source to Internal on the Master

MixRack, and to Remote Port B on the Slave MixRack. Use Dante

Controller to tick ‘Preferred master’ and ‘Slave to external wordclock’

for the Master MixRack only.

For more on setting up and using the Dante network please refer to

Audinate’s user guides that come with Dante Controller and Dante

Virtual Soundcard and to further information at www.audinate.com.

FOH

Ethernet port

DANTE

Gigabit Switch

Recording

computer

ACE

Port B M-Dante

Primary port

DANTE

Port B M-Dante

Primary port

MONITOR

1 2 3 4 5 6 7 8

Keine Kommentare

ALLEN & HEATH iLIVE Einstellungsanleitung Seite 7