ALLEN & HEATH iLIVE Betriebsanweisung PDF herunterladen (Seite 25)

iLive Fixed Format Getting Started Guide 25 AP7141 iss.6b

Step 7 – Patch the sockets

The iLive features a built-in soft patchbay that lets you freely patch input and output sockets. The default

Template Shows provide a standard patch as a useful starting point. You can change this patching to suit

your application and store it in the Scene and Show memories.

View and patch channel INPUT sockets

Press SEL for an input channel and view its screen PREAMP

page (Make sure the keys next to the TouchScreen are

turned off). Use the Source Select boxes at the top of the

screen to view and change the input socket feeding the

channel. The sockets are identified by Device (Rack,

Surface or Port B), Slot (position) and Socket (number).

View and patch OUTPUT sockets

Select the TouchScreen OUTPUTS screen. Touch the tab to

select which output sockets to patch - MixRack, Surface or

Port B (if the option is fitted).

Touch Single to select and patch a signal to one output.

Touch Range to patch related signals to a range of sockets.

Touch Apply after each change.

If you have the AES digital output card option fitted then

assign these in the same way. Assign a pair of outputs to

each AES socket, for example 7 and 8.

Patching INSERTS

In most cases you do not need to insert outboard

processing. However, if required you can assign output and

input sockets as insert sends and returns for situations

where an engineer wants to use a particular device. Any

number of inserts may be assigned.

Press a channel or mix SEL key. Return to the top level

parameter screen. Touch the INSERT panel to open the

INSERT screen.

Use the drop down menus to assign the send and return

Devices. After selecting both, touch Apply. Select the

required Operating Level, typically +4dBu.

Note - Once a socket is assigned as an insert it is no longer

available for other purposes. Unassign the insert to re-use

the sockets.

Signals available to patch:

Mono/St Group

Mono/St Aux

Main mix

Mono/St Matrix

Input channel direct output

PAFL monitor L, R

MixRack inputs (mic split)

Bus out 1-32

Wedge/IEM monitor

ACE link (Port A)

Port B (network option)

Select the tab to view the sockets

you wish to patch.

Touch the socket to view its current

patch or to select it for patching.

Select source from the drop-down

menu and number box.

Touch Apply to confirm the change

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

ALLEN & HEATH iLIVE Betriebsanweisung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DJ-Controller ALLEN & HEATH iLIVE